International Rubber Products Ltd. offers new Inflatable Packers in standard DST (see definition below) sizes. These packers can be recovered and rebuilt multiple times, resulting in a cost savings to the customer.

Now available specially formulated HNBR for Hi-Temp Applications, developed specifically for Down Hole Packer applications.

Conventional Packers can be built to the customers specifications, reguarding; OD, ID, length and material.

Mandrel Wrapping is an alternative to the high costs of mold building and modifying to reach a useable part. Low volumn mandrel wrapping and machining during the R&D process can keep costs down to a minimum. This process can also be made and tested much quicker than building a mold.

DST-Drill Stem Test Definition

In oil and natural gas extraction, the drill stem includes the drill pipe, drill collars, bottom hole assembly, and drill bit. A drill stem test (DST) is a procedure for testing the surrounding geological formation through the drill pipe.

During normal drilling, fluid is pumped through the drill stem and out the drill bit. Instead, in a drill stem test, fluid from the formation is recovered through the drill stem, while several measurements of pressure are being made.

The basic drill stem test tool consists of a packer or packers, valves or ports that may be opened and closed from the surface, and two or more pressure-recording devices. (A packer is an expanding plug which can be used to seal off sections of the open well, here to isolate them for testing.) The tool is lowered on the drill pipe to the zone to be tested. The packer or packers are set to isolate the zone from the drilling fluid column, and testing measurement begins.